I have always wanted a model of the RMS St Helena, but they always evaded me because there are not too many available in the first place. The easiest way to get one is realistically to scratch build one and see what that turns out like. There are however, a few problems with that scenario. The first being: where do I get plans from?
A line drawing of the ship is easy to find, I have quite a few on my computer as it is.
I have been lugging around lots of images of the ship since she first entered service, and amongst my stuff is the A&P Appledore publicity handout above. That will serve as the basis of my project.
Problem number 2 is that while I do have accommodation plans of her, I do not have a top view of her, so there things are going to be somewhat icky.
Interestingly enough 2 1/1250 waterline models do exist, and I have been “in the market” as they say. However, they are very scarce and probably way out of my budget range. My usual supplier, Tim at Convoy Models managed to lay his hands on one, and this is what it looks like. It was created by Oceanic and I have a sneaky suspicion that this was a concept that never reached fruition, probably because the RMS is not one of those well known glamorous Cunarders that everybody swoons over (or should I say used to swoon over?). She is a working ship and is really a hybrid between cargo ship and cruise ship.
I have since managed to acquire one of those models myself and it is a very poor casting with the port side superstructure needing a lot of attention. I have since commenced work on the ship and have managed to fill some of the holes in the superstructure and hull and it looks as if I will be be completing this model, at least to a point where it is recognisable as being the RMS.
Continuing with the original post…
The ship is 105 metres long, and according to my handy scale converting tool, a 1/1250 model should be about 84 mm long, with a beam of 19,2 mm (15 metres). The problem is… how do I scale the drawing down to that size? I first printed out the image and then tried a few things but kept on hitting a brick wall. Eventually I decided to shrink the image down to the size I needed on a scanner. Some rough calculating and trial and error led me to reduce the size of the drawing by 34% which left me with a image roughly 86 mm long.
Now, what will I use to build it with? I have some balsa wood hanging around from when I modified my display cases and I managed to create a block of balsa longer than 85mm and 15mm wide. Theoretically, if I then attach my reduced scale image to the block, then mark the specific sizes onto the top of the block I will have something that theoretically should look like the RMS! I used the term “theoretically” because there is no guarantee that it will work, or that I will ever finish the project.
The really irritating thing is that back in South Africa I have a proper plan of the ship which I got from one of the officers on board her in 1993 when I sailed on her. It never occurred to me to bring the plans back with me in April, but then I had too many other things on my mind at the time.
So, where do I sit now? I am cutting out the image and affixing it to my balsa block and will then see how viable it is to build the superstructure as a separate entity and affix it to the hull once I have created the hull. It is early days yet, and I only really work on this sort of thing over a weekend.
So, this is part one of my ongoing project to build an RMS. I have not scratch built anything in ages, so may just give up at any juncture, it really depends on what I can do with the limited tools that I do have at my disposal. Ideally I would have preferred a harder wood for the hull, but Balsa should work, at least for the MKI.
After finishing this post I worked a bit more on the ship and after basic the results look something like this:
At this point I am convinced that shedding the accommodation block may be a good idea. It may be better to build it separately than to try hack what is there already. The Balsa wood is easy to work with but it splinters easily and it is going to be difficult to smooth out the vertical sides. I may try get some Jelutong or Basswood and start from the bottom again. But, I will see, it is early days yet. I do however need to get wood filler, some plasticard and a sealant/varnish so that I can seal the Balsa. I will think about it.
A few days later…
Today is the 20th and between when I first posted and now a number of things happened.
Firstly I sent the balsa model to the breakers. It was just not working out. I did some homework and was not able to source Jelutong or what is known as “basswood”, if it was available the sizes were way out of what I was looking for. However, the remnants from my display cases did provide me with a length of wood which is a millimetre thinner than what I needed. However, I will not tell if you won’t. I marked up the sizes and used my handy saw to cut out a rough shape. This morning I was sanding like crazy and the end result is as follows…
However, when creating the bow I hit a snag that I will have to work around. The ship has a decided “knuckle” as well as a very raked bow. I was not able to recreate that effect so may end up having to revert to some judicious use of a filler and I will have to sleep on that problem. The one option I do have is to to slice off the deck and create a new piece and glue it in place. You can see the knuckle in the image below.
The red area on “B” Deck is a recessed area on her superstructure that is the entrance to her insides, and where the weather deck access is and the gangway is stowed. I am not quite sure how to deal with that yet.
“C” Deck does not have to be created as it is below the weather deck level. and apart from the recess I do not have to do much work on it either.
“A” deck is more or less where my superstructure is at now, however, I may need to add a section to increase the height of A deck. The biggest problem that I do have is the height of each deck. I suspect they are roughly 2,5 metres high, allowing for about 7 foot ceilings with the remaining void being used for pipes and cables.
The Prom deck and upwards are the major bits of accommodation that I have to build. Above the prom deck is where I am having to refer to memory. There are two deck levels above it, and the first level is slightly shorter than the prom deck but is the same width as it (after looking at pics I am not quite so sure of that anymore). This is the level where the lifeboats are, and their davits terminate at prom deck level. The pool is also on the prom deck and there is a recessed cargo hatch on that deck.
Above that deck is the navigating bridge and chartroom and I think the radio room is there too. The funnel is partly on top of that deck, and it houses the mast too.
The ship has had a few structural modifications to her accommodation, but I am really going for the look of the ship as she was when I sailed on her. Incidentally, her hull colour is “Oxford blue”. I have not really considered the weather deck, I need to fabricate 2 cranes as well as hatches and deck machinery, and that will not be easy.
On Sunday I did some exploration work with balsa and technically this is what it may look like.
What have I discovered?
The deck above the Prom is possibly a bit too short, but given that there is a pool there and cargo hatch it may be right. I need to bear in mind that aft mooring deck is not properly done yet either. That will cut down on available deck space. The deck around the bridge area can be walked around, so it needs to be smaller than the deck below it. The funnel shape needs careful consideration because it is kind of distinctive. Then there are bridge wings to add, and of course the angled side to the superstructure ends. There is a ladder in that area so I may have to experiment more in that area. Balsa ain’t gonna work! Davits! I need davits!
Yesterday I was looking at my Leda Model which is 1/1250 as well, and she does present me with interesting comparison and references for cranes, lifeboats and superstructure.
Leda was 133 metres long which is a bit longer than the RMS so it isn’t too hard to make a comparison. However, against the Leda my RMS is out of scale.
So this is where we are now. If you hear any woodworking noises you at least will know that they come from me.
Where are we now? I managed to get some 2mm plastic and have been reworking the superstructure block. The plastic works quite easily and can hold a sharp edge and doesn’t splinter. However, I still have to find an adhesive that will attach it to the wood hull.
The funnel started out as a rough shape and may not be the final shape I want so it may be redone. However, I still need to make changes to the superstructure decks. I have deliberately created the block wider than it should be so that I can file everything square once it is mounted because the RMS does not have a lot of curves. I have also cut away the gangway points in the hull. With hindsight though I really need to file that open deck area down by at least 2 mm more and raise bulwarks on that deck to maintain the deck height and sheer line. Naturally I have no idea what I can use to do this (it always happens). Scrap plastic anybody?
27/05/2017 much later that afternoon.
I attacked my ship with a file and dropped the well deck level considerably, certainly lower than it was and after much work was rewarded with this…
I also measured her up against my 34% image and she is very close to the image in proportions. I am seeing progress at last, but tomorrow is another day.
It is now tomorrow. I added in some bulwarks and redid the 2nd layer off the superstructure block after getting an image from somebody that cleared up the area for me. The one mistake I cannot rectify is the bow shape and after adding in the bulwarks it made the bow even steeper. The only real way to solve the bow problem is to reshape it from scratch and that will impact on the length of the ship. I have decided to stick with what I have and to complete the ship anyway. I have come far enough with it and do not feel like building another hull. Once day I will create another, but not this week/month. I added in a sheet of plastic under the bridge and trimmed it to support bridge wings that I have made out of small pieces of wood. I may change that to proper bridge wings if I can figure out how. Thin brass would be nice.
I also painted the hull in a rough coat of blue and white and assembled the ship as it is. The funnel is still the temporary one.
And here she is. I think she is starting to look like the RMS! I need to add the screens around the pool area which will extend the accommodation block and fill that empty deck area, and consider how I will create hatches for the well deck and foredeck. And at some point I need to glue the superstructure blocks together and file them smooth. But that will not happen in this blogpost. Anything done after today will end up in next months posts.
When last we left the ship she was in a state of…
At that point I had changed the superstructure and was contemplating the well deck bulwarks. In the back of my mind was the feeling that I needed to change them so I ended up ripping them out and replacing them with aluminium ones cut from a beer tin. If only I had thought of that originally I would have saved myself considerable work (and £2.99 for a sheet of brass). The superstructure has been rough painted and filed more or less level with the hull section. I scrapped the original bridge wing scheme too because I was going to make them out of brass, but that idea has also changed and I may see whether it is easy to make them out of aluminium so that I can have a proper bridge wing effect. There is also a section of steel that merges the slope of the superstructure with the bridge wing. I need to see how that comes together too.
As at 19.21 today she looks something like this…
I have made the crane mounting post and added in the well deck hatch and started to see what arrangement I could make for her two cranes. This is not how the new cranes will look. I have made proper ones now but they still have glue drying so haven’t been mounted yet. I am also on the lookout for paint for her decks. They use a light blue on her steel decking so I am either going to have to mix or buy a tinlet. At any rate I am not going anywhere until I have the bulwarks fixed. The bend angle that I used created a empty space between the bulwark and the deck so that needs to be fixed too. I still have not created her funnel either, probably because I hate working with wood.
What have I learnt so far?
The well deck may be too high or the deck between it and the fo’c’stle may be too low. I am unable to achieve the slight upward slope of the bulwarks because there is this size issue between the gangway area and the well deck. I do not know how to solve this yet. Actually looking at some of my pics, she has two housings on either side of the deck where the cranes are mounted. I may be able to use that to create my sloping bulwarks. I must investigate that.
My wooden crane sucked. I do have a length of styrene and it has worked well enough that I have a set of cranes that may work well.
The aft deck screen around the pool needs to be put in motion, as must the davits. I have the perfect material for the davits and should be able to churn out 4 sets without too much of a headache. But, I have to make lifeboats which means the headache is back. The length of styrene may work for the boats. I must experiment a bit.
I need to start straightening my sheer lines once have the bulwarks sorted and I need to experiment with bridge wings, ah what fun!
In the meantime, some more views of the real ship. I see on my pics her fo’c’stle was Oxford blue too, that should make my work easier.
So. That is where we are now. During the week I hope to do more work on her and then will post progress when I am done next weekend.
When last you we saw the RMS she was looking more RMS-like all the time. However…
This afternoon I attacked her with a saw.
After ripping off her superstructure I cut away a third of the deck and filed it flat. The deck used to end where the patch of blue now is. I then headed off to Cheltenham and came back with basswood and a few more interesting goodies and rebuilt that deck. Because of the size of the wood I ended up having to use two pieces instead of one. The result looks something like this….
I then refabricated bulwarks and added them in, masked the hull and painted the white area in. (No pics as the paint is wet). On Friday I made the funnel that you can see above, it needs to be flatter at the top though, not sloping backwards. I also added my new crane unit just for show. The issue there is that the one boom stretches from the crane and rests on a cradle affixed to the superstructure front. My one boom is consequently longer than the other.
I have made one major decision though. This model is far from anywhere near perfect, in fact it is a hodge podge of wood and plastic and really quite poor. However, I have learnt a lot by building it, and I will complete it so that it looks much better than it does now, and then I will consider building another with the knowledge I have gained building this service pack 1. When I started I did not have the one image I have now (which I cannot show because it belongs to somebody else), That image showed me a lot of detail that I could not get off my existing images. Ideally I need the plans but it looks like my brother is trying hard not to be seen. I did ask him to go look for them but I guess he never found them or never looked. Anyway, building will stop this week as I have the landlord popping in to check that I haven’t wrecked the place so my ship and associated goodies are being hidden away till next week.
I have made a lot of progress this afternoon. One thing about the weather, it makes you stay indoors and work on your ships! The aft pool area is more or less completely built although it may change, I have done some preliminary work on painting decks and am experimenting with davits. The issue with them is glue. The super glue is useless and the other all purpose glue is also useless. I may need to add a notch in the decks for the davit to rest on. Thinking about it still. Funnel is glued down and two hatches have been added although crane assy is still not stuck down. She is looking much better, not perfect, but better.
Still to do:
Build 4 lifeboats and 8 davits, mount them.
Bridge wings. Still need those.
Crane on starboard deck aft
Think about gangway
Black topping to funnel and logo… I have no idea how to do that logo on such a small scale. Print it out and shrink it down I guess. √ Sorted! Shrunk a logo to 9% printed, cut out and mounted it. Voila!
Bridge front needs to be done. It does not sit flush with the accommodation but protrudes slightly.
Mast and associated satnav gear.
Two derricks on well deck
Two housings on foredeck and associated machinery
It is the 18th of June and the RMS is almost done… although “done” has not quite been explained.
I have added the aft crane, 4 lifeboats, a “mast”, forespike, foredeck housings and am really at a point where I need to touch up paint and finish this puppy off finally.
Those lifeboats were a major pain. The conventional davits that I made proved almost impossible to mount. There was just nothing apart from 2 points where they were glued to keep them in place., never mind to mount a lifeboat on. The davits are a mess. How the heck they make them in this scale (and smaller) is beyond me. That was a major stumbling block as far as I am concerned. The bow shape is wrong, the bulwarks are just exacerbating the problem. Talking of bulwarks… did I mention that I managed to get them on? the small square hole in the hull is where the gangway sits, currently the hole is too short, but trying to enlarge it may be dangerous. The mast is OK, but not quite what I was trying to achieve. The derricks in the well deck are OK, although their booms are pieces of wire and proved to be hell to get to sit in the correct position. The aft crane looks more like a 6 inch gun. I need to change that. I also should have stayed with the yellow I had on the funnel. The yellow I have now is icky.
Paintwork is an abomination. Because I made so many changes the paint ended up lumpy and short of sanding it all off will always look lumpy. I jumped the gun when it came to painting her and am now saddled with what I have. There isn’t much I can do at this point, although having completed the ship I am tempted to try sand her hull and accommodation down to bare wood and then repaint. I have not decided. I am very tempted to try change the bow shape though, but having almost finished the ship I am now loathe to break it again.
Portholes and windows? I am thinking about them. 2 Options: either make them out of trimline or create a stencil and paint them in. The former works but the trimline tends to come off. Painting is a pain. I need to experiment. I tried using the trimline option on the bridge front but it ended up skew and the white parts disassociated themselves with the experiment.
Now that I look at her, she actually looks kind of like the RMS after all.
A new iteration?
Things have changed a lot since I started this project. I have better images and I have a set of deckplans (thanks Glynn), I also have better wood, tools and know more about how the ship comes together so a new version should be an improvement (almost anything would be an improvement). However, my eyesight and sausage fingers are just not allowing me to work to such small scale (old age they call it), and I need to sort out the glue issue, this stuff I am using now is a major source of irritation. And of course the thought of those damn lifeboats and davits leaves me frazzled. I would build a scaled up version but the problem with that is… railings. I rest my case.
This post is the last of the construction posts. Next time you see it I will be completing the ship.
Thanks for watching this space, soon there will be a new space to watch.
© DRW 2017-2018. Created 04/06/2017. Updated 18/06/2017. Posts combined 30/01/2018