musings while allatsea

Musings of a curious individual

Still building the RMS

Buried a few posts back is my progress on building a 1/1250-ish model of the RMS St Helena. If you don’t know what I am talking about I suggest you start from the back.

Where am I now?

*Click here for the 18/06/2017 update*

When last we left the ship she was in a state of…

At that point I had changed the superstructure and was contemplating the well deck bulwarks. In the back of my mind was the feeling that I needed to change them so I ended up ripping them out and replacing them with aluminium ones cut from a beer tin. If only I had thought of that originally I would have saved myself considerable work (and £2.99 for a sheet of brass). The superstructure has been rough painted and filed more or less level with the hull section. I scrapped the original bridge wing scheme too because I was going to make them out of brass, but that idea has also changed and I may see whether it is easy to make them out of aluminium so that I can have a proper bridge wing effect. There is also a section of steel that merges the slope of the superstructure with the bridge wing. I meed to see how that comes together too. 

 As at 19.21 today she looks something like this…

I have made the crane mounting post and added in the well deck hatch and started to see what arrangement I could make for her two cranes. This is not how the new cranes will look. I have made proper ones now but they still have glue drying so haven’t been mounted yet. I am also on the lookout for paint for her decks. They use a light blue on her steel decking so I am either going to have to mix or buy a tinlet. At any rate I am not going anywhere until I have the bulwarks fixed. The bend angle that I used created a empty space between the bulwark and the deck so that needs to be fixed too.  I still have not created her funnel either, probably because I hate working with wood. 

What have I learnt so far?

The well deck may be too high or the deck between it and the fo’c’stle may be too low. I am unable to achieve the slight upward slope of the bulwarks because there is this size issue between the gangway area and the well deck. I do not know how to solve this yet. Actually looking at some of my pics, she has two housings on either side of the deck where the cranes are mounted. I may be able to use that to create my sloping bulwarks. I must investigate that. 

My wooden crane sucked. I do have a length of styrene and it has worked well enough that I have a set of cranes that may work well. 

The aft deck screen around the pool needs to be put in motion, as must the davits. I have the perfect material for the davits and should be able to churn out 4 sets without too much of a headache. But, I have to make lifeboats which means the headache is back. The length of styrene may work for the boats. I must experiment a bit.

I need to start straightening my sheer lines once have the bulwarks sorted and I need to experiment with bridge wings, ah what fun! 

In the meantime, some more views of the real ship. I see on my pics her fo’c’stle was Oxford blue too, that should make my work easier. 

So. That is where we are now. During the week I hope to do more work on her and then will post progress when I am done next weekend. 

10/06/2017. 

When last you we saw the RMS she was looking more RMS-like all the time. However…

This afternoon I attacked her with a saw.

After ripping off her superstructure I cut away a third of the deck and filed it flat. The deck used to end where the patch of blue now is. I then headed off to Cheltenham and came back with basswood and a few more interesting goodies and rebuilt that deck.  Because of the size of the wood I ended up having to use two pieces instead of one. The result looks something like this….

I then refabricated bulwarks and added them in, masked the hull and painted the white area in. (No pics as the paint is wet). On Friday I made the funnel that you can see above, it needs to be flatter at the top though, not sloping backwards. I also added my new crane unit just for show. The issue there is that the one boom stretches from the crane and rests on a cradle affixed to the superstructure front. My one boom is consequently longer than the other.  

I have made one major decision though. This model is far from anywhere near perfect, in fact it is a hodge podge of wood and plastic and really quite poor. However, I have learnt a lot by building it, and I will complete it so that it looks much better than it does now, and then I will consider building another with the knowledge I have gained building this service pack 1. When I started I did not have the one image I have now (which I cannot show because it belongs to somebody else), That image showed me a lot of detail that I could not get off my existing images. Ideally I need the plans but it looks like my brother is trying hard not to be seen. I did ask him to go look for them but I guess he never found them or never looked. Anyway, building will stop this week as I have the landlord popping in to check that I haven’t wrecked the place so my ship and associated goodies are being hidden away till next week. 

11/06/2017.

I have made a lot of progress this afternoon. One thing about the weather, it makes you stay indoors and work on your ships! The aft pool area is more or less completely built although it may change, I have done some preliminary work on painting decks and am experimenting with davits. The issue with them is glue. The super glue is useless and the other all purpose glue is also useless. I may need to add a notch in the decks for the davit to rest on. Thinking about it still. Funnel is glued down and two hatches have been added although crane assy is still not stuck down. She is looking much better, not perfect, but better.

Still to do:

Build 4 lifeboats and 8 davits, mount them. 

Bridge wings. Still need those.

Crane on starboard deck aft

Repaint

Think about gangway

Black topping to funnel and logo… I have no idea how to do that logo on such a small scale. Print it out and shrink it down I guess. √  Sorted! Shrunk a logo to 9% printed, cut out and mounted it. Voila!

Bridge front needs to be done. It does not sit flush with the accommodation but protrudes slightly. 

Mast and associated satnav gear.

Two derricks on well deck 

Two housings on foredeck and associated machinery

Till then…

It is the 18th of June and the RMS is almost done… although “done” has not quite been explained. 

I have added the aft crane, 4 lifeboats, a “mast”, forespike, foredeck housings and am really at a point where I need to touch up paint and finish this puppy off finally.

Those lifeboats were a major pain. The conventional davits that I made proved almost impossible to mount. There was just nothing apart from 2 points where they were glued to keep them in place., never mind to mount a lifeboat on. The davits are a mess. How the heck they make them in this scale (and smaller) is beyond me. That was a major stumbling block as far as I am concerned. The bow shape is wrong, the bulwarks are just exacerbating the problem. Talking of bulwarks… did I mention that I managed to get them on? the small square hole in the hull is where the gangway sits, currently the hole is too short, but trying to enlarge it may be dangerous. The mast is OK, but not quite what I was trying to achieve. The derricks in the well deck are OK, although their booms are pieces of wire and proved to be hell to get to sit in the correct position. The aft crane looks more like a 6 inch gun. I need to change that. I also should have stayed with the yellow I had on the funnel. The yellow I have now is icky. 

Paintwork is an abomination. Because I made so many changes the paint ended up lumpy and short of sanding it all off will always look lumpy. I jumped the gun when it came to painting her and am now saddled with what I have. There isn’t much I can do at this point, although having completed the ship I am tempted to try sand her hull and accommodation down to bare wood and then repaint. I have not decided. I am very tempted to try change the bow shape though, but having almost finished the ship I am now loathe to break it again. 

Portholes and windows? I am thinking about them. 2 Options: either make them out of trimline or create a stencil and paint them in. The former works but the trimline tends to come off. Painting is a pain. I need to experiment. I tried using the trimline option on the bridge front but it ended up skew and the white parts disassociated themselves with the experiment. 

Now that I look at her, she actually looks kind of like the RMS after all.

A new iteration?

Things have changed a lot since I started this project. I have better images and I have a set of deckplans (thanks Glynn), I also have better wood, tools and know more about how the ship comes together so a new version should be an improvement (almost anything would be an improvement). However, my eyesight and sausage fingers are just not allowing me to work to such small scale (old age they call it), and I need to sort out the glue issue, this stuff I am using now is a major source of irritation. And of course the thought of those damn lifeboats and davits leaves me frazzled. I would build a scaled up version but the problem with that is… railings. I rest my case.

This post is the last of the construction posts. Next time you see it I will be completing the ship. 

Thanks for watching this space, soon there will be a new space to watch.

© DRW 2017. Created 04/06/2017. Updated 18/06/2017

DR Walker © 2014 -2017. Frontier Theme